18 0191 2467

A how-to guide in removing your old window tints

Window Tinting in Laredo TX

Car owners call window tinting Bloomington, Indiana, for satisfactory, precise window tint installation. Despite the high cost, they would not hesitate to spend lots of money to buy window tints for their vehicles. But, why?

Window tints are worthy investments that offer lasting benefits greater than their costs. A window tint, made up of thin layers of films, prolongs the car’s lifespan. It also makes the vehicle more appealing and provides extra privacy for you and your loved ones.

Quality is one factor that car owners consider before investing in premium window tinting, Bloomington ID. Well, it determines the tint’s longevity. The cheaper the window tint, the faster it degrades. For car owners, better to spend multi-dollars right now instead of buying and replacing old window tints again and again in the long run. Aside from that, a window tint’s life also depends on the quality of installation and exposure to sunlight.

Yet, regardless of whether your window tint is cheap or premium, it will still deteriorate in the future. Symptoms like bubble formation and discoloration are the most common signs that your window tints need replacement already. Tapping professional window tint installers is the most advisable choice to do. Yet, you can also do it yourself. Remove your old and tattered window tints by following these simple steps.

Materials you need

Here are the materials you need to prepare first before proceeding to the removal process:

  • Spray bottle
  • Razor Blades
  • Soft cloth
  • Dishwashing soap
  • Glass Cleaner
  • Water

The DIY removal process

The process of removing the car’s old window tints is a piece of cake. However, be careful. Take the steps with caution as you do not want to inflict any scratch on your windows. In that way, vying for a new window tint film coating will go smooth and perfect.

Step 1: Do a small incision on the film

Cut a small part of the film on one side by using the razor blade. Be sure that you will not press the blade deeply. Doing such will keep scratches from your windows or windshields away.

Step 2: Slowly peel the film

Continuing the process to the corner where you made an incision, peel the window tint with care. The entire window tint can take off in one go, so take it slow. In case that the film didn’t peel in some portions, use the razor blade to lift the film’s edge. Then, repeat the process until your remove everything off.

Step 3: Spray the windows with a soapy water mixture

Mix and combine a small amount of water and dishwashing soap in the spray bottle. There are no specific measurements needed. Just ensure that the mixture will become soapy enough. Once the combination is complete, spray the parts exposed to the adhesive with a generous amount of solution.

Step 4: Let the mixture soak and soften the adhesive

Allow the soapy mixture to sit, soak, and soften the adhesive after spraying. This process is crucial as it makes the next step easier to do.

Step 5: No adhesives left behind

Using the razor blade again, remove all the remaining adhesive residue on the glass. Scrape the adhesives while it is still wet to avoid scratching the windows. When the glass has already dried up, spray the areas with more soapy soap and do the same process until no residue is left.

Step 6: Clean the windows

After removing the tints, get a glass cleaner and soft cloth to wipe the windows clean. If a glass cleaner is not available, do not worry. You may use a water mixture and dishwashing soap as its replacement. Remember that do not ever use ammonia-based cleaners and abrasive cleaning products as those can damage the windows.

If you want to learn more techniques in removing your old car window tint, refer to this infographic by Kepler.

Leave a Reply

Your email address will not be published. Required fields are marked *